Fenix BC30 V2.0 Bike Light

Fenix BC30 V2.0 – High-Performance Bike Light (Second Generation)

The second generation of the extremely powerful Fenix BC30 V2.0 delivers up to 2200 lumens (ANSI). It can be powered by two rechargeable 18650 Li-ion batteries (flat-top 18650 cells may have poor contact) or four disposable CR123A batteries. Equipped with two Luminus SST-40 LEDs, it uses the proven Dual Distance Beam System, providing both long-range and wide illumination. The main beam reaches up to 187 meters, while the secondary beam evenly lights the area directly in front of the bike.

This model adds wireless remote control for mode switching and instant Burst activation. The quick-release mount allows tool-free installation and removal, turning the light into a powerful handheld flashlight if needed. Compatible with handlebars 22–32 mm in diameter.

It offers six digitally regulated brightness levels including a flashing warning mode and battery level indicator. Ideal for night training, daily commuting, or endurance races.

Note: Batteries are not included.
All specifications (luminous flux, runtime, waterproofing, and beam distance) comply with ANSI/NEMA FL 1-2009 standards.

Operation:
Press and hold the main button for 0.5 s to turn on/off. The light starts in the lowest mode; press to cycle through brightness levels. Double-press for strobe mode. The remote allows switching modes and activating Burst mode. To pair the remote, hold the button for 5 s until it flashes red/green, then press any button on the remote within 1.5 m distance.

Battery indicator:
• Green: >80%
• Orange: 40–80%
• Red: 10–40%
• Flashing red: <10% (light automatically reduces brightness to save power)

Warning:
• Do not disassemble sealed components (warranty void).
• If the button glows red and high mode won’t activate, batteries are low.
• If flickering or no light, check battery charge or clean contacts with alcohol.